Measuring Instrument(co co2) - List of Manufacturers, Suppliers, Companies and Products

Measuring Instrument Product List

1～15 item / All 15 items

Displayed results
High-precision gas/vapor adsorption measurement device BELSORP MAX II-HV

High-precision gas/vapor adsorption measurement device BELSORP MAX II-HV

Demo/analysis now accepting applications! Specifications for high-temperature steam adsorption measurement! For catalysts, cement, desiccant air conditioning, low-temperature waste heat recovery, and carbon neutrality evaluation.

The "BELSORP MAX II-HV" is a high-precision gas/vapor adsorption measurement device capable of measuring not only vapor adsorption but also gas adsorption. It can measure adsorption isotherms of water vapor and non-corrosive organic vapors for up to 4 samples simultaneously over a wide temperature range. It is equipped with a Gas Introduction Optimization function (GDO) that allows for reduced measurement time. 【Features】 ■ Pre-treatment temperature: Up to 550°C with a separate heater ■ Measurement temperature: Dewar flask (77K/87K) / Circulation unit (5–70°C) ■ Capable of measuring adsorption isotherms of water vapor and non-corrosive organic vapors for up to 4 samples simultaneously over a wide temperature range ■ Capable of measuring gas adsorption in addition to vapor adsorption ■ Equipped with a Gas Introduction Optimization function (GDO) that allows for reduced measurement time *For more details, please refer to the PDF document or feel free to contact us.

  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-precision gas adsorption measurement device "BELSORP MAX G"

High-precision gas adsorption measurement device "BELSORP MAX G"

Demo/analysis now available. Compact and low-cost! Dedicated equipment capable of evaluation from micro pores (activated carbon, zeolite, MOF, etc.).

"BELSORP MAX G" is a compact and low-cost gas adsorption measurement device within the BELSORP MAX series. It is a dedicated instrument capable of measuring gas adsorption isotherms from extremely low pressures for the evaluation of porous and non-porous materials with micro, meso, and macro pores. It is equipped with one measurement port, one dedicated port for measuring saturation vapor pressure, and one reference port, each with its own dedicated pressure sensor, allowing for high-precision measurements. 【Features】 ■ Evaluation from micro pores is possible through N2 and Ar ultra-low pressure isotherm measurements with the highest level of reproducibility. ■ Ultra-micropore evaluation is possible through CO2 adsorption. ■ Low specific surface area measurement through Kr adsorption. ■ Measurement of adsorption isotherms and adsorption rates for H2, CO2, O2, CH4, and non-corrosive gases. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-precision gas/vapor adsorption measurement device BELSORP MAXII-HP

High-precision gas/vapor adsorption measurement device BELSORP MAXII-HP

Demo/analysis now available. A new lineup of specifications for high-pressure gas adsorption measurement has been added. (Carbon neutral, hydrogen storage, etc.)

The "BELSORP MAXII-HP" is a high-precision gas/vapor adsorption measurement device capable of evaluating material properties (BET specific surface area and pore distribution) as well as gas and vapor separation performance. A new high-pressure gas adsorption measurement specification has been added to the BELSORP MAXII lineup. In addition to evaluating the BET, pore distribution, and vapor adsorption of materials, it is now possible to evaluate the adsorption of various gases under high pressure. 【Features】 ■ Capable of evaluating the adsorption of various high-pressure gases (up to 900 kPa) at temperatures up to 70°C ■ Accurate adsorption evaluation achieved through automatic calculation of the compressibility factor, taking into account the non-ideality of various adsorbate gases ■ The analysis software BELMaster Ver. 7 allows for not only BET and pore distribution analysis but also adsorption rate evaluation *For more details, please refer to the PDF document or feel free to contact us.

  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral True Density Measurement Device

Carbon Neutral True Density Measurement Device

Evaluation of cement and concrete materials for effective utilization of CO2 - Achieving high-precision automatic measurement easily for anyone.

In the measurement of true density of powders and granules, a sample cell of 1cc to 10cc is used to precisely measure a small amount of sample. By evaluating the true density, it becomes possible to assess the porosity of the powder and the primary particle size. 【Applications】 Catalysts, fuel cells, secondary batteries, fibers, polymer materials, chemicals, pigments, cosmetics, magnetic powders, separation membranes, filters, toners, cement, ceramics, semiconductors, food. *For more details, please contact us. We also accept requests for demos and sample analyses, so feel free to reach out.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral True Density Measurement Device

Carbon Neutral True Density Measurement Device

Evaluation of materials for CO2-free clean energy 'batteries' - Achieving high-precision automatic measurements easily for anyone.

In the measurement of true density of powders and granules, a sample cell of 1cc to 10cc is used to precisely measure a small amount of sample. By evaluating the true density, it becomes possible to assess the porosity of the powder and the primary particle size. 【Applications】 Catalysts, fuel cells, secondary batteries, fibers, polymer materials, chemicals, pigments, cosmetics, magnetic powders, separation membranes, filters, toners, cement, ceramics, semiconductors, food. *For more details, please contact us. We also accept requests for demonstrations and sample analyses, so feel free to reach out.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral Static Image Analysis Particle Size Distribution and Shape Measurement Device

Carbon Neutral Static Image Analysis Particle Size Distribution and Shape Measurement Device

Evaluation of materials for "batteries," a clean energy source that does not emit CO2 - High-speed and high-precision evaluation of particle shapes.

The CAMSIZER M1 measures particle size and shape in the range of 0.5μm to 1500μm based on the principle of static image analysis. It is based on a microscope system compliant with static image analysis ISO13322-1 and is equipped with hardware optimized for automation and user-friendly software. 【Applications】 Cement, concrete, fibers, abrasives, pharmaceuticals, food, metal powders, minerals *For more details, please contact us. We also accept requests for demos and sample analyses, so feel free to reach out.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral Particle Size Distribution and Shape Measurement Device

Carbon Neutral Particle Size Distribution and Shape Measurement Device

Evaluation of Cement and Concrete Materials for Effective Utilization of CO2 - Using a Single Device for Particle Size Distribution and Particle Shape Assessment -

The core technology of Microtrac MRB combines laser diffraction/scattering and dynamic image analysis into a single device. With our patented synchronized measurement technology, we achieve a multifaceted evaluation of particle size distribution and particle shape in a single measurement. 【Applications】 A wide variety of adaptable materials and applications Battery materials, ceramics, metal materials for 3D printers, glass beads, resins, construction materials (aggregates, cement), pharmaceuticals, food, cosmetics, etc. *For more details, please contact us. We also accept requests for demonstrations and sample analyses, so feel free to reach out.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral Particle Size Distribution and Shape Measurement Device

Carbon Neutral Particle Size Distribution and Shape Measurement Device

Evaluation of materials for "batteries," a clean energy source that does not emit CO2 - Particle size distribution and particle shape evaluation using a single device.

The core technology of Microtrac MRB combines laser diffraction/scattering and dynamic image analysis into a single device. With our patented synchronized measurement technology, we achieve a multifaceted evaluation of particle size distribution and particle shape in a single measurement. 【Applications】 A wide variety of adaptable materials and applications Battery materials, ceramics, metal materials for 3D printers, glass beads, resins, construction materials (aggregates, cement), pharmaceuticals, food, cosmetics, etc. *For more details, please contact us. We also accept requests for demonstrations and sample analyses, so feel free to reach out.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral Particle Size Distribution / Particle Size Distribution and Zeta Potential Measurement Device

Carbon Neutral Particle Size Distribution / Particle Size Distribution and Zeta Potential Measurement Device

Evaluation of materials for CO2-emission-free clean energy "batteries" - Particle size distribution and zeta potential measurement using a single device.

The NANOTRAC WAVE II series is a particle size distribution (particle size distribution) and zeta potential device that uses backscattering measurement with an optical probe. It is capable of obtaining stable data from low to high concentrations. 【Applications】 Battery materials, beverages, food, pharmaceuticals, cosmetics, cement, inks, paints, pigments, semiconductors, minerals, polymer materials, polymers. *For more details, please contact us. We also accept requests for demonstrations and sample analyses, so feel free to reach out.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral Specific Surface Area / Pore Distribution Measurement Device

Carbon Neutral Specific Surface Area / Pore Distribution Measurement Device

Evaluation of materials for "batteries," a clean energy source that does not emit CO2 - A surface area and pore distribution measurement device equipped with X's "outstanding superiority."

The BELSORP MINI X is a product that allows for the assessment of the performance of conductive materials through specific surface area evaluation. Additionally, it enables the evaluation of specific surface area and density (pore distribution) of electrode materials (oxides and sulfides) for all-solid-state batteries without exposing them to the atmosphere. In recent years, amid a global shortage of He gas, this product allows for high-precision specific surface area evaluation without using He gas. 【Applications】 Catalysts, battery electrodes/conductive materials, carbon, chemicals, cosmetics, cement, toner, pigments, ceramics, semiconductors. *For more details, please contact us. We also accept requests for demonstrations and sample analyses, so feel free to reach out to us.*

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral High-Precision Gas/Steam Adsorption Measurement Device

Carbon Neutral High-Precision Gas/Steam Adsorption Measurement Device

Evaluation of materials for CO2 separation and capture - The definitive device for measuring the world's highest level of gas and vapor adsorption.

With a single device, it is possible to evaluate specific surface area, pore distribution, gas and vapor adsorption capacity, adsorption rate, and chemical adsorption measurements. Since it can perform adsorption evaluations over a wide range (from low pressure to high pressure and low temperature to high temperature), it is optimal not only for material characterization but also for process evaluation. 【Applications】 Catalysts, gas separation, storage, CCS, CCSU, various batteries, capacitors, fibers, polymer materials, chemicals, pigments, cosmetics, magnetic powders, separation membranes, filters, toners, cement. *For more details, please contact us. We also accept requests for demonstrations and sample analyses, so feel free to reach out.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral High-Precision Gas/Steam Adsorption Measurement Device

Carbon Neutral High-Precision Gas/Steam Adsorption Measurement Device

Evaluation of materials for CO2 separation and recovery - Utilizing various adsorbents, enabling assessment of specific surface area in various shapes.

The flagship model of the new generation BELSORP is now complete ~ Maximum performance with the highest quality ~ The 'BELSORP MAX X' is a high-precision gas/vapor adsorption measurement device capable of measuring up to 4 samples across a wide range from ultra-low pressure to high relative pressure, and from low temperature to high temperature. Equipped with a full-scale 0.0133 kPa pressure sensor and utilizing unique technology that minimizes permeation, leakage, and gas release, it enables highly reproducible adsorption isotherm measurements from ultra-low pressures. The new measurement software enhances user productivity by improving material structure and durability understanding, measurement efficiency, tracking measurement progress and maintenance timing, and sending measurement results via email. Additionally, the analysis software (BELMasterTM) can be used for a wide range of material evaluations. 【Features】 ■ Simultaneous measurement of up to 4 samples ■ Achieves world-class reproducibility ■ Reduction of measurement time ■ Supports various adsorbates and a wide range of measurement conditions ■ Capable of measurements tailored to various materials *For more details, please contact us. We also accept requests for demonstrations and sample analyses, so feel free to reach out.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral High-Precision Gas/Steam Adsorption Measurement Device

Carbon Neutral High-Precision Gas/Steam Adsorption Measurement Device

Evaluation of cement and concrete materials aimed at effective utilization of CO2 - Utilizing various adsorbents to evaluate specific surface areas of different shapes.

The flagship model of the new generation BELSORP is now complete ~ Maximum performance with the highest quality ~ The 'BELSORP MAX X' is a high-precision gas/vapor adsorption measurement device capable of measuring up to 4 samples across a wide range from ultra-low pressure to high relative pressure, and from low temperature to high temperature. Equipped with a full-scale 0.0133 kPa pressure sensor and utilizing unique technology that minimizes permeation, leakage, and gas release, it enables highly reproducible adsorption isotherm measurements from ultra-low pressures. With new measurement software, it enhances user productivity by providing insights into material structure and durability, improving measurement efficiency, tracking measurement progress and maintenance timing, and enabling email transmission of measurement results. Additionally, the analysis software (BELMasterTM) can be used for a wide range of material evaluations. 【Features】 ■ Simultaneous measurement of up to 4 samples ■ Achieves world-class reproducibility ■ Reduces measurement time ■ Supports various adsorbates and a wide range of measurement conditions ■ Capable of measurements tailored to various materials *For more details, please contact us. We also accept requests for demos and sample analyses, so feel free to reach out.

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon Neutral High-Precision Gas/Steam Adsorption Measurement Device

Carbon Neutral High-Precision Gas/Steam Adsorption Measurement Device

Evaluation of cement and concrete materials aimed at the effective utilization of CO2 - Utilizing various adsorbents to enable the assessment of specific surface areas of different shapes.

The flagship model of the new generation BELSORP is now complete ~ Maximum performance with the highest quality ~ The 'BELSORP MAX X' is a high-precision gas/vapor adsorption measurement device capable of measuring up to 4 samples across a wide range from ultra-low pressure to high relative pressure, and from low temperature to high temperature. Equipped with a full-scale 0.0133 kPa pressure sensor and utilizing unique technology that minimizes permeation, leakage, and gas release, it enables highly reproducible adsorption isotherm measurements from ultra-low pressures. The new measurement software enhances user productivity by providing insights into material structure and durability, improving measurement efficiency, tracking measurement progress and maintenance timing, and enabling email transmission of measurement results. Additionally, the analysis software (BELMasterTM) can be used for a wide range of material evaluations. 【Features】 ■ Simultaneous measurement of up to 4 samples ■ Achieves world-class reproducibility ■ Reduces measurement time ■ Supports various adsorbates and a wide range of measurement conditions ■ Capable of measurements tailored to various materials *For more details, please contact us. We also welcome inquiries for demonstrations and sample analyses, so feel free to reach out.*

  • Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-precision gas adsorption measurement device 'BELSORP MAX G'

High-precision gas adsorption measurement device 'BELSORP MAX G'

Demo/analysis now available. A new low-cost model has been added to the lineup! It can be widely used for electronic materials, battery materials, and more.

The "BELSORP MAX G" is a dedicated device for evaluating porous and non-porous materials (BET specific surface area and pore distribution) and gas adsorption capacity. A compact and low-cost model has been newly added to the lineup of BELSORP MAX, which can evaluate from micropores. It can be widely used in catalysts, batteries (solid-state batteries, fuel cells, etc.), fibers, polymer materials, chemicals, pigments, cosmetics, and more. 【Features】 ■ Evaluation of BET specific surface area and a wide range of pore distribution from micropores through ultra-low pressure measurements of N2 (77.4K) and Ar (87.3K) ■ Evaluation of low specific surface area through gas adsorption measurements with Kr (77.4K) ■ Advanced analysis using BELMaster Ver.7 equipped with new pore distribution theories such as GCMC and NLDFT ■ Gas introduction optimization (GDO) function ensures reliable evaluation of each adsorption point in a short time *For more details, please refer to the PDF document or feel free to contact us.

  • Other analytical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Measuring Instrument

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.